{"title":"Harley-Davidson Fat Bob","description":"\u003cp\u003eThe Fat Bob has lived on two platforms: the Dyna Fat Bob (FXDF, 2008-2017) and the Milwaukee-Eight Softail Fat Bob (FXFB and FXFBS 114, 2018 on) with its inverted front end and dual headlight. This page covers both generations. Shocks, fork cartridges, exhaust, and tuners listed here are confirmed-fit by year and model code, so check the fitment notes on each product page before you buy.\u003c\/p\u003e","products":[{"product_id":"ohlins-18-22-harley-softail-fat-bobshowanix-30-street-cartridge-kit-incl-springs-08444-95-10-11","title":"2018-2021 Harley-Davidson Softail Fat Bob Öhlins NIX 30 Street Front Fork Cartridge Kit (Showa)","description":"\u003cp\u003eÖhlins NIX 30 Street front fork cartridge kit for Harley-Davidson Softail Fat Bob, 2018-2022. A drop-in upgrade for the OEM front fork internals, delivering Öhlins-grade compression and rebound damping without replacing the complete fork assembly.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX 30 platform uses a larger 30mm damping piston than the NIX 22 cartridge kits used elsewhere in the Öhlins Softail lineup — the larger piston delivers more oil flow and damping authority, tuned specifically for the Fat Bob's chassis and wider front-end use case.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShowa fork only.\u003c\/strong\u003e This cartridge kit fits the Showa-equipped front fork variant. Confirm your fork is the Showa variant before ordering — Harley shipped multiple fork brands across the year range and these cartridges will not fit other fork architectures.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX architecture separates compression and rebound damping between the left and right fork legs — compression in one leg, rebound in the other — for more precise damping control than the OEM internals. Adjustments are made at the fork cap, alongside the spring preload. The cartridges install bolt-in into the original fork tubes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNIX damping architecture with isolated compression (left leg) and rebound (right leg) circuits\u003c\/li\u003e\n\u003cli\u003e30mm damping piston\u003c\/li\u003e\n\u003cli\u003eExternal compression and rebound damping adjusters at the fork caps\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original Öhlins-compatible fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins NIX 30 Street cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see the fitment guide on Öhlins's website or call Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits Showa forks only. Confirm fork brand before ordering — physical fitment will not work on other fork architectures.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. The correct spring rate depends on rider weight; Öhlins publishes a fitment guide and Öhlins USA technical support can recommend the right spring for your application.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately. Öhlins publishes a recommended oil specification for these cartridges.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins NIX 30 Street\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 30mm\u003c\/li\u003e\n\u003cli\u003eFitment: Showa-equipped forks only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556497209,"sku":"OHLFKS 508","price":1373.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/bb8acc4eacf550409d59156df27e994c.jpg?v=1778950348"},{"product_id":"fox-harley-davidson-am-dyna-std-grip-fork-cartridge-49mm-set-of-2","title":"2006-2017 Harley-Davidson Dyna\/Softail Fox Grip Street Performance Fork Cartridge Kit 49mm Standard","description":"\u003cp\u003eFox Grip Street Performance fork cartridge kit for the 49mm Harley-Davidson Dyna and 2013-2017 Softail front end. Replaces the factory damping internals with a sealed, opposed-piston cartridge that ends brake dive and keeps the front wheel planted.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpeed-sensitive closed-cartridge damping with opposed-piston design — prevents air from mixing into the oil for consistent control\u003c\/li\u003e\n\u003cli\u003eLinear-rate springs maintain consistent support through the stroke, reducing brake dive and corner wallow\u003c\/li\u003e\n\u003cli\u003eSpring-loaded upper piston absorbs small bumps without the internal friction of gas-charged designs\u003c\/li\u003e\n\u003cli\u003eDrop-in, bolt-in design — works with the existing fork legs and retains the stock appearance\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-valvable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eCovers both fork legs. Installation requires fork removal and disassembly, and a fork oil service — professional installation is recommended if you are not equipped for fork work. No permanent modifications to the fork are required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFork diameter: 49mm\u003c\/li\u003e\n\u003cli\u003eSpring rate: Standard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Powersports","offers":[{"title":"Default Title","offer_id":53300911276345,"sku":"FOX890-27-008","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/6d3cedfb1d5551571e2a48011bcd0903L_a601d7b5-b6c8-4f7c-97c0-d410ab062fea.png?v=1778956000"},{"product_id":"fox-harley-davidson-am-dyna-12-5in-height-12-56-2-51-1-459-ifp-qsr-set-of-2","title":"1991-2017 Harley-Davidson Dyna Fox IFP-QSR Rear Shocks 12.5 in Standard Spring","description":"\u003cp\u003eFox Street Performance IFP-QSR rear shocks for Harley-Davidson Dyna models. A direct bolt-on upgrade with Fox's gas-charged IFP monotube and a tool-free three-position Quick Switch Rebound (QSR) adjuster to match damping character to the road.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-position Quick Switch Rebound (QSR) adjustment, no tools required\u003c\/li\u003e\n\u003cli\u003eGas-charged monotube with internal floating piston (IFP) keeps nitrogen and oil separated for fade-free damping\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum body with Type III hard-anodized finish\u003c\/li\u003e\n\u003cli\u003eLow-friction, super-finished hard chrome shaft\u003c\/li\u003e\n\u003cli\u003eAdvanced high-flow, deflective-disc velocity-sensitive damping\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-valvable\u003c\/li\u003e\n\u003cli\u003eMatte black spring with black-anodized preload ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo rear shock absorbers (left and right)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eStandard spring — Fox-recommended for total ride load up to approximately 240 lb. Direct bolt-on replacement; no modifications required. If installing a length different from your OEM shocks, verify wheel and suspension travel clearance at the swingarm, fender, belt guard, and exhaust before riding.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: 12.5 in\u003c\/li\u003e\n\u003cli\u003eSpring: Standard\u003c\/li\u003e\n\u003cli\u003eExtended length: 12.56 in\u003c\/li\u003e\n\u003cli\u003eTravel: 2.51 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Powersports","offers":[{"title":"Default Title","offer_id":53300912914745,"sku":"FOX897-27-205","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/c44dbace3b245ea9b9bfc5374e3efcd7L_e7855cfb-0be0-4538-af4b-2285c312beee.png?v=1778956019"},{"product_id":"fox-harley-davidson-am-dyna-13-5in-height-13-56-3-51-1-459-ifp-qsr-set-of-2","title":"1991-2017 Harley-Davidson Dyna Fox IFP-QSR Rear Shocks 13.5 in Standard Spring","description":"\u003cp\u003eFox Street Performance IFP-QSR rear shocks for Harley-Davidson Dyna models. A direct bolt-on upgrade with Fox's gas-charged IFP monotube and a tool-free three-position Quick Switch Rebound (QSR) adjuster to match damping character to the road.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-position Quick Switch Rebound (QSR) adjustment, no tools required\u003c\/li\u003e\n\u003cli\u003eGas-charged monotube with internal floating piston (IFP) keeps nitrogen and oil separated for fade-free damping\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum body with Type III hard-anodized finish\u003c\/li\u003e\n\u003cli\u003eLow-friction, super-finished hard chrome shaft\u003c\/li\u003e\n\u003cli\u003eAdvanced high-flow, deflective-disc velocity-sensitive damping\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-valvable\u003c\/li\u003e\n\u003cli\u003eMatte black spring with black-anodized preload ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo rear shock absorbers (left and right)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eStandard spring — Fox-recommended for total ride load up to approximately 240 lb. Direct bolt-on replacement; no modifications required. If installing a length different from your OEM shocks, verify wheel and suspension travel clearance at the swingarm, fender, belt guard, and exhaust before riding.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: 13.5 in\u003c\/li\u003e\n\u003cli\u003eSpring: Standard\u003c\/li\u003e\n\u003cli\u003eExtended length: 13.56 in\u003c\/li\u003e\n\u003cli\u003eTravel: 3.51 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Powersports","offers":[{"title":"Default Title","offer_id":53300912980281,"sku":"FOX897-27-206","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/c44dbace3b245ea9b9bfc5374e3efcd7L_9c3f6351-928b-4ac3-9e39-d55972356126.png?v=1778956020"},{"product_id":"fox-harley-davidson-am-18my-softail-13-00-2-00-1-834-ifp-qsr-set-of-2","title":"2018-2026 Harley-Davidson Softail Fox IFP-QSR Rear Shock 13 in Standard Spring","description":"\u003cp\u003eFox Street Performance IFP-QSR rear shock for 2018-up Harley-Davidson Softail (Milwaukee-Eight) models. Replaces the single under-seat mono-shock with a gas-charged Fox IFP monotube and a tool-free three-position Quick Switch Rebound (QSR) adjuster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoftail models use a single rear mono-shock — this listing is for one shock, which is the complete rear suspension replacement for the bike.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-position Quick Switch Rebound (QSR) adjustment, no tools required\u003c\/li\u003e\n\u003cli\u003eGas-charged monotube with internal floating piston (IFP) keeps nitrogen and oil separated for fade-free damping\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum body with Type III hard-anodized finish\u003c\/li\u003e\n\u003cli\u003eLow-friction, super-finished hard chrome shaft\u003c\/li\u003e\n\u003cli\u003eAdvanced high-flow, deflective-disc velocity-sensitive damping\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-valvable\u003c\/li\u003e\n\u003cli\u003eMatte black spring with black-anodized preload ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne rear mono-shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eDirect replacement for the factory mono-shock; no modifications required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: 13 in\u003c\/li\u003e\n\u003cli\u003eExtended length: 13.00 in\u003c\/li\u003e\n\u003cli\u003eTravel: 2.00 in\u003c\/li\u003e\n\u003cli\u003eSpring: Standard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Powersports","offers":[{"title":"Default Title","offer_id":53300913144121,"sku":"FOX897-27-208","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/50eaa28b03cbe88fe6819e22170231a8L_576c933e-582a-4eca-bfed-3e66ff3d339e.png?v=1778956022"},{"product_id":"fox-93-17-harley-davidson-fxdwg-dyna-wide-glide-rear-qs3-qsr-performance-series-shock-kit","title":"1991-2017 Harley-Davidson Dyna Fox QS3-QSR Adjustable Rear Shocks 13.5 in Standard Spring","description":"\u003cp\u003eFox Street Performance QS3-QSR adjustable rear shocks for Harley-Davidson Dyna models. Piggyback reservoirs carry a three-position QS3 compression switch, and the Quick Switch Rebound (QSR) adjusts rebound in three positions — full damping adjustability with no tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQS3 three-position compression and QSR three-position rebound adjustment, no tools required\u003c\/li\u003e\n\u003cli\u003ePiggyback reservoirs with integrated compression adjusters\u003c\/li\u003e\n\u003cli\u003eGas-charged monotube with internal floating piston (IFP) keeps nitrogen and oil separated for fade-free damping\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum body with Type III hard-anodized finish\u003c\/li\u003e\n\u003cli\u003eLow-friction, super-finished hard chrome shaft\u003c\/li\u003e\n\u003cli\u003eAdvanced high-flow, deflective-disc velocity-sensitive damping\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-valvable\u003c\/li\u003e\n\u003cli\u003eMatte black spring with black-anodized preload ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo rear shock absorbers (left and right)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eStandard spring — Fox-recommended for total ride load up to approximately 240 lb. Direct bolt-on replacement; no modifications required. If installing a length different from your OEM shocks, verify wheel and suspension travel clearance at the swingarm, fender, belt guard, and exhaust before riding.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: 13.5 in\u003c\/li\u003e\n\u003cli\u003eSpring: Standard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Powersports","offers":[{"title":"Default Title","offer_id":53300913635641,"sku":"FOX897-27-305","price":1399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/fa89c7b01214485e7b4ffdc1d20fc78fL.png?v=1778956027"},{"product_id":"fox-harley-davidson-am-18my-softail-13-50-2-50-1-834-ifp-qsr-set-of-2","title":"2018-2026 Harley-Davidson Softail Fox IFP-QSR Rear Shock 13.5 in Standard Spring","description":"\u003cp\u003eFox Street Performance IFP-QSR rear shock for 2018-up Harley-Davidson Softail (Milwaukee-Eight) models. Replaces the single under-seat mono-shock with a gas-charged Fox IFP monotube and a tool-free three-position Quick Switch Rebound (QSR) adjuster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoftail models use a single rear mono-shock — this listing is for one shock, which is the complete rear suspension replacement for the bike.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-position Quick Switch Rebound (QSR) adjustment, no tools required\u003c\/li\u003e\n\u003cli\u003eGas-charged monotube with internal floating piston (IFP) keeps nitrogen and oil separated for fade-free damping\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum body with Type III hard-anodized finish\u003c\/li\u003e\n\u003cli\u003eLow-friction, super-finished hard chrome shaft\u003c\/li\u003e\n\u003cli\u003eAdvanced high-flow, deflective-disc velocity-sensitive damping\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-valvable\u003c\/li\u003e\n\u003cli\u003eMatte black spring with black-anodized preload ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne rear mono-shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eDirect replacement for the factory mono-shock; no modifications required. The 13.5 in length sits slightly taller than the stock fitment — verify suspension travel clearance before riding.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: 13.5 in\u003c\/li\u003e\n\u003cli\u003eExtended length: 13.50 in\u003c\/li\u003e\n\u003cli\u003eTravel: 2.50 in\u003c\/li\u003e\n\u003cli\u003eSpring: Standard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Powersports","offers":[{"title":"Default Title","offer_id":53300913701177,"sku":"FOX897-27-309","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/50eaa28b03cbe88fe6819e22170231a8L_0f5fca38-c714-4012-932b-9af145b6ea98.png?v=1778956028"},{"product_id":"vance-hines-hd-touring-softail-17-21-forged-carbon-falcon-air-intake","title":"2017-2022 Harley-Davidson Touring\/Softail Vance \u0026 Hines VO2 Falcon Air Intake Forged Carbon Fiber","description":"\u003cp\u003eDeveloped for the performance-minded enthusiast looking for superior bolt-on power and torque, the VO2 Falcon resets the bar for 90º intakes with four superb finishes including show-quality chrome, ceramic matte black, and two eye-catching carbon fiber choices; high gloss traditional weaved carbon and first for the V-twin world, matte forged carbon. From its slant-nosed oversized filter for higher volume air flow to its precision machined billet aluminum winged mounting and integrated breather assembly, the clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its performance.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased airflow over stock airbox for improved throttle response and horsepower\u003c\/li\u003e\n\u003cli\u003eSlant-nosed oversized cone filter with precision-machined billet aluminum mounting and integrated breather assembly\u003c\/li\u003e\n\u003cli\u003eForged carbon fiber finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir filter assembly\u003c\/li\u003e\n\u003cli\u003eBackplate\u003c\/li\u003e\n\u003cli\u003eDecorative cover\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eManufacturer installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFuel management is recommended when paired with a performance exhaust system. The intake alone is OEM-compatible on most applications without remap, but pairing with aftermarket exhaust requires tuning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish: Forged carbon fiber\u003c\/li\u003e\n\u003cli\u003eSeries: VO2 Falcon\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined billet aluminum with high-flow filter element\u003c\/li\u003e\n\u003cli\u003eOrigin: Designed and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vance and Hines","offers":[{"title":"Default Title","offer_id":53320573518137,"sku":"VAH40049","price":659.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/1ebce3dd2e8ee36c3d5f460ecabaac22.png?v=1779552183"},{"product_id":"vance-hines-hd-touring-softail-17-22-vo2-insight-black","title":"2017-2021 Harley-Davidson Touring\/Softail Vance \u0026 Hines VO2 Insight Air Intake Black","description":"\u003cp\u003eCatch a glimpse of your intake's inner workings with the VO2 Insight. Housed in a precision-machined billet aluminum cover assembled with stainless racing-grade ARP hardware, the VO2 Insight features an innovative filter design combining our high-flow oiled-media with a clear polycarbonate top embossed with the Vance \u0026amp; Hines logo. Inside, the VO2 Insight uses our new 'patent pending' Force™ Velocity Stack to accelerate air into your engine.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased airflow over stock airbox for improved throttle response and horsepower\u003c\/li\u003e\n\u003cli\u003eVelocity-tuned intake with billet machined cover and open-element filter\u003c\/li\u003e\n\u003cli\u003eBlack finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir filter assembly\u003c\/li\u003e\n\u003cli\u003eBackplate\u003c\/li\u003e\n\u003cli\u003eDecorative cover\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eManufacturer installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFuel management is recommended when paired with a performance exhaust system. The intake alone is OEM-compatible on most applications without remap, but pairing with aftermarket exhaust requires tuning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSeries: VO2 Insight\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined billet aluminum with high-flow filter element\u003c\/li\u003e\n\u003cli\u003eOrigin: Designed and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vance and Hines","offers":[{"title":"Default Title","offer_id":53320573976889,"sku":"VAH41077","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/42444aa8c6e792b34e0461afba03512a.png?v=1779552187"},{"product_id":"vance-hines-hd-touring-trgld-softail-m8-vo2-stingray","title":"2017-2022 Harley-Davidson Touring\/Softail Vance \u0026 Hines VO2 Stingray Air Intake","description":"\u003cp\u003eFor a sleek contoured look inspired by the hood scoops of the classic muscle car era, the VO2 Stingray Air Intake kit is a great step toward completing your Stage 1 performance upgrade along with a Vance \u0026amp; Hines FP4 tuner and exhaust system. The VO2 Stingray Air Intake kit adds just the right touch to enhance the nostalgia of your timeless push rod v-twin engine and includes a high flow washable air filter as well as our patent pending Force™ Velocity Stack for optimum performance gains.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased airflow over stock airbox for improved throttle response and horsepower\u003c\/li\u003e\n\u003cli\u003eStingray-styled cover with deep finned heatsink design\u003c\/li\u003e\n\u003cli\u003eBlack finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir filter assembly\u003c\/li\u003e\n\u003cli\u003eBackplate\u003c\/li\u003e\n\u003cli\u003eDecorative cover\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eManufacturer installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eDesigned specifically for 2017 and later Milwaukee-Eight (M8) engines. Not compatible with earlier Twin Cam platforms.\u003c\/p\u003e\u003cp\u003eFuel management is recommended when paired with a performance exhaust system. The intake alone is OEM-compatible on most applications without remap, but pairing with aftermarket exhaust requires tuning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSeries: VO2 Stingray\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined billet aluminum with high-flow filter element\u003c\/li\u003e\n\u003cli\u003eEngine compatibility: Milwaukee-Eight\u003c\/li\u003e\n\u003cli\u003eOrigin: Designed and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vance and Hines","offers":[{"title":"Default Title","offer_id":53320574271801,"sku":"VAH42371","price":274.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/e6988e819ab1a3f95b51120f62de86b5.jpg?v=1779552189"},{"product_id":"vance-hines-hd-softail-fat-bob-18-22-hi-output-2-1-black-pcx-full-system-exhaust","title":"2018-2022 Harley-Davidson Softail Vance \u0026 Hines Hi-Output 2-into-1 Full System Exhaust Black","description":"\u003cp\u003eEngineered to be a compact version of the signature stepped megaphone, the Vance \u0026amp; Hines Hi-Output 2-into-1 Short is perfect for the rider that demands the performance of a 2-into-1 and the distinctive sound of the Hi-Output, deep, throaty note.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete 2-into-1 exhaust system with header pipes and mufflers\u003c\/li\u003e\n\u003cli\u003eHigh-flow 2-into-1 collector tuned for mid-range torque gains\u003c\/li\u003e\n\u003cli\u003eBlack finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet end caps\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeader pipes\u003c\/li\u003e\n\u003cli\u003eMuffler(s)\u003c\/li\u003e\n\u003cli\u003eHeat shields\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and brackets\u003c\/li\u003e\n\u003cli\u003eExhaust gaskets\u003c\/li\u003e\n\u003cli\u003eManufacturer installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFuel management is required for proper operation. Compatible with the Vance \u0026amp; Hines Fuelpak FP4, V\u0026amp;H Pro Tuner, or Harley-Davidson Screamin' Eagle Pro Street Tuner. Without proper fuel mapping, the engine may run lean and the check engine light may activate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eConfiguration: 2-into-1\u003c\/li\u003e\n\u003cli\u003eMaterial: Mandrel-bent steel with high-temperature finish\u003c\/li\u003e\n\u003cli\u003eCatalyst: PCX™ hidden crossover with chambered high-flow catalysts (where applicable)\u003c\/li\u003e\n\u003cli\u003eOrigin: Designed and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vance and Hines","offers":[{"title":"Default Title","offer_id":53320577188153,"sku":"VAH47331","price":1594.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/9366a714f8f49062b38a9dba646087c6.jpg?v=1779552199"},{"product_id":"vance-hines-hd-touring-softail-17-21-vo2-falcon-intake-chrome","title":"2017-2022 Harley-Davidson Touring\/Softail Vance \u0026 Hines VO2 Falcon Air Intake Chrome","description":"\u003cp\u003eDeveloped for the performance-minded enthusiast looking for superior bolt-on power and torque, the VO2 Falcon resets the bar for 90º intakes with four superb finishes including show-quality chrome, ceramic matte black, and two eye-catching carbon fiber choices; high gloss traditional weaved carbon and first for the V-twin world, matte forged carbon. From its slant-nosed oversized filter for higher volume air flow to its precision machined billet aluminum winged mounting and integrated breather assembly, the clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its performance.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased airflow over stock airbox for improved throttle response and horsepower\u003c\/li\u003e\n\u003cli\u003eSlant-nosed oversized cone filter with precision-machined billet aluminum mounting and integrated breather assembly\u003c\/li\u003e\n\u003cli\u003eChrome finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir filter assembly\u003c\/li\u003e\n\u003cli\u003eBackplate\u003c\/li\u003e\n\u003cli\u003eDecorative cover\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eManufacturer installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFuel management is recommended when paired with a performance exhaust system. The intake alone is OEM-compatible on most applications without remap, but pairing with aftermarket exhaust requires tuning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish: Chrome\u003c\/li\u003e\n\u003cli\u003eSeries: VO2 Falcon\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined billet aluminum with high-flow filter element\u003c\/li\u003e\n\u003cli\u003eOrigin: Designed and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vance and Hines","offers":[{"title":"Default Title","offer_id":53320578335033,"sku":"VAH71061","price":604.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/d8e35163178f75a45a11fb2d8b457727.png?v=1779552211"},{"product_id":"vance-hines-hd-touring-softail-radiant-v-intake-chrome","title":"2017-2021 Harley-Davidson Touring\/Softail Vance \u0026 Hines Radiant V Air Intake Chrome","description":"\u003cp\u003eThe sleek and minimalistic design delivers maximum air flow to your bike's engine using a high-capacity air filter and the new patent pending Force™ Velocity Stack. The VO2 Radiant III delivers increased air flow and gives your motorcycle a sleek custom look.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased airflow over stock airbox for improved throttle response and horsepower\u003c\/li\u003e\n\u003cli\u003eOpen-element high-flow filter with V-shaped backing plate for radial airflow\u003c\/li\u003e\n\u003cli\u003eChrome finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir filter assembly\u003c\/li\u003e\n\u003cli\u003eBackplate\u003c\/li\u003e\n\u003cli\u003eDecorative cover\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eManufacturer installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFuel management is recommended when paired with a performance exhaust system. The intake alone is OEM-compatible on most applications without remap, but pairing with aftermarket exhaust requires tuning.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish: Chrome\u003c\/li\u003e\n\u003cli\u003eSeries: Radiant V\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined billet aluminum with high-flow filter element\u003c\/li\u003e\n\u003cli\u003eOrigin: Designed and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vance and Hines","offers":[{"title":"Default Title","offer_id":53320578695481,"sku":"VAH71462","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/bfdccacbd4ed3bf0f536f70578ef84b6_a2af3b30-b220-452e-9603-7470629160f0.jpg?v=1779552214"},{"product_id":"dynojet-harley-davidson-delphi-j1850-power-vision-ecu-cable","title":"Harley-Davidson Dynojet Power Vision ECU Cable Delphi J1850","description":"\u003cp\u003eThe Dynojet Power Vision ECU Cable is a replacement diagnostic cable for connecting a Power Vision flash tuner to Harley-Davidson motorcycles equipped with the older Delphi J1850 ECU protocol. This is the correct cable for pre-2010 Harley-Davidson bikes and select later models that retained the J1850 bus. If your bike uses the newer Delphi CAN-bus protocol, order the CAN version of this cable instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-style diagnostic port connector for Delphi J1850 equipped Harley-Davidson models\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the diagnostic cable shipped with Power Vision units\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation, no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Vision ECU diagnostic cable (Delphi J1850)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable is intended for use with an existing Dynojet Power Vision tuner. Power Vision unit sold separately. Confirm your motorcycle uses Delphi J1850 diagnostics before ordering — most pre-2010 Harley-Davidson models use J1850, but later bikes use CAN-bus and require the CAN cable instead.\u003c\/p\u003e","brand":"Dynojet","offers":[{"title":"Default Title","offer_id":53321360310585,"sku":"DOJ76950241","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/816bc2ffab83c25a6cc164e05a04d2b9.jpg?v=1779569441"},{"product_id":"dynojet-harley-davidson-delphi-can-power-vision-ecu-cable","title":"Harley-Davidson Dynojet Power Vision ECU Cable Delphi CAN","description":"\u003cp\u003eThe Dynojet Power Vision ECU Cable is a replacement diagnostic cable for connecting a Power Vision flash tuner to Harley-Davidson motorcycles equipped with the Delphi CAN-bus ECU. This is the correct cable for most 2010-2020 model year Harley-Davidson bikes using CAN-bus diagnostics. If your bike uses the older Delphi J1850 protocol, order the J1850 version of this cable instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-style diagnostic port connector for Delphi CAN-bus equipped Harley-Davidson models\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the diagnostic cable shipped with Power Vision units\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation, no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Vision ECU diagnostic cable (Delphi CAN)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable is intended for use with an existing Dynojet Power Vision tuner. Power Vision unit sold separately. Confirm your motorcycle uses Delphi CAN-bus diagnostics before ordering — most 2010-2020 Harley-Davidson models use CAN, but earlier bikes and some specific models use the J1850 protocol and require the J1850 cable instead.\u003c\/p\u003e","brand":"Dynojet","offers":[{"title":"Default Title","offer_id":53321360376121,"sku":"DOJ76950346","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/9c87c52f90dad88f5111b0b57842bdf4.jpg?v=1779569442"},{"product_id":"dynojet-2021-harley-davidson-power-vision-reflash-cable","title":"2021-2023 Harley-Davidson Touring\/Softail Dynojet Power Vision 4 Reflash Cable","description":"\u003cp\u003eThe Dynojet Power Vision 4 Reflash Cable is a replacement diagnostic cable for the Power Vision 4 tuner on 2021 and newer Harley-Davidson Touring and Softail models. This cable connects the PV4 to the bike's OEM diagnostic port when the original cable needs replacement or when a second cable is required for shop or fleet use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-style diagnostic port connector for 2021+ Harley-Davidson Touring and Softail\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the diagnostic cable shipped with Power Vision 4 units\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation, no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Vision 4 reflash cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable is intended for use with an existing Dynojet Power Vision 4 tuner. Power Vision 4 unit sold separately. This cable is specific to 2021 and newer Harley-Davidson Touring and Softail models — for older Harley-Davidson bikes, use the appropriate Delphi CAN or Delphi J1850 ECU cable instead.\u003c\/p\u003e","brand":"Dynojet","offers":[{"title":"Default Title","offer_id":53321360441657,"sku":"DOJ76951048","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/6450ee0eac8aecbaab1270736dd65e28.jpg?v=1779569443"},{"product_id":"dynojet-11-20-harley-davidson-power-vision-4","title":"2011-2020 Harley-Davidson Touring\/Softail Dynojet Power Vision 4 Flash Tuner","description":"\u003cp\u003eThe Dynojet Power Vision 4 is a Bluetooth flash tuner that pairs with the Dynojet mobile app to write performance tunes directly to your bike's ECU. Unlike piggyback tuners, the PV4 modifies the factory ECU calibration — improving throttle response, removing speed limiters, and enabling tunes built for aftermarket exhaust and intake configurations. This version covers Twin Cam and Milwaukee-Eight Touring and Softail models from 2011 to 2020. The original factory tune is backed up and can be restored at any time, returning the bike to stock.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth wireless flash tuning via the Dynojet mobile app (iOS and Android)\u003c\/li\u003e\n\u003cli\u003eAccess to Dynojet's library of pre-built tunes plus custom tune support from Authorized Tuning Centers\u003c\/li\u003e\n\u003cli\u003eQuicktune menu for one-tap control of active compression release, EITMS, VSS, knock control, and fan settings\u003c\/li\u003e\n\u003cli\u003eAutotune Basic uses factory O2 sensors; Autotune Pro available with optional wideband O2 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine data logging viewable in WinPEP 8 Data Center\u003c\/li\u003e\n\u003cli\u003eLicense additional vehicles through the app without buying a new device\u003c\/li\u003e\n\u003cli\u003eFactory tune is backed up to the cloud and restorable at any time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Vision 4 Bluetooth tuning device\u003c\/li\u003e\n\u003cli\u003eOEM diagnostic port connector\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003cli\u003eAccess to the Dynojet mobile app and cloud tune library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe Power Vision 4 connects through the OEM diagnostic port and pairs to a smartphone via Bluetooth. Tunes are selected and flashed entirely from the mobile app — no computer required. For wideband Autotune Pro functionality, an optional Autotune Wideband O2 Module or Target Tune Wideband O2 Module is sold separately. This SKU (PV4-15-02) is covered under CARB Executive Order D-619-14 for 2017-2020 Touring and 2018-2020 Softail models only. Use on other model years and other platforms is prohibited in California.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnection: OEM diagnostic port, Bluetooth wireless to phone\u003c\/li\u003e\n\u003cli\u003eApp compatibility: iOS and Android\u003c\/li\u003e\n\u003cli\u003eTuning type: ECU flash (modifies factory calibration)\u003c\/li\u003e\n\u003cli\u003eData logging: Real-time, viewable in WinPEP 8 Data Center\u003c\/li\u003e\n\u003cli\u003eWarranty: 1-year Dynojet manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eCARB status: 50-state legal for 2017-2020 Touring and 2018-2020 Softail. For other covered model years, not legal for sale or use in California — confirm before ordering if California-registered.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynojet","offers":[{"title":"Default Title","offer_id":53321363849529,"sku":"DOJPV4-15-02","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/1552c84211617772fd560a4b11f57460L.png?v=1779569485"},{"product_id":"dynojet-2021-harley-davidson-power-vision-4","title":"2021-2023 Harley-Davidson Touring\/Softail Dynojet Power Vision 4 Flash Tuner","description":"\u003cp\u003eThe Dynojet Power Vision 4 is a Bluetooth flash tuner that pairs with the Dynojet mobile app to write performance tunes directly to your bike's ECU. Unlike piggyback tuners, the PV4 modifies the factory ECU calibration — improving throttle response, removing speed limiters, and enabling tunes built specifically for aftermarket exhaust and intake configurations. The original factory tune is backed up and can be restored at any time, returning the bike to stock.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth wireless flash tuning via the Dynojet mobile app (iOS and Android)\u003c\/li\u003e\n\u003cli\u003eAccess to Dynojet's library of pre-built tunes plus custom tune support from Authorized Tuning Centers\u003c\/li\u003e\n\u003cli\u003eQuicktune menu for one-tap control of active compression release, EITMS, VSS, knock control, and fan settings\u003c\/li\u003e\n\u003cli\u003eAutotune Basic uses factory O2 sensors; Autotune Pro available with optional wideband O2 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine data logging viewable in WinPEP 8 Data Center\u003c\/li\u003e\n\u003cli\u003eLicense additional vehicles through the app without buying a new device\u003c\/li\u003e\n\u003cli\u003eFactory tune is backed up to the cloud and restorable at any time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Vision 4 Bluetooth tuning device\u003c\/li\u003e\n\u003cli\u003eOEM diagnostic port connector\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003cli\u003eAccess to the Dynojet mobile app and cloud tune library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe Power Vision 4 connects through the OEM diagnostic port and pairs to a smartphone via Bluetooth. Tunes are selected and flashed entirely from the mobile app — no computer required. For wideband Autotune Pro functionality, an optional Autotune Wideband O2 Module or Target Tune Wideband O2 Module is sold separately. PV4 is covered under CARB Executive Order D-619-14 for 2021-2022 Touring and Softail models only. Use on other model years is prohibited in California.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnection: OEM diagnostic port, Bluetooth wireless to phone\u003c\/li\u003e\n\u003cli\u003eApp compatibility: iOS and Android\u003c\/li\u003e\n\u003cli\u003eTuning type: ECU flash (modifies factory calibration)\u003c\/li\u003e\n\u003cli\u003eData logging: Real-time, viewable in WinPEP 8 Data Center\u003c\/li\u003e\n\u003cli\u003eWarranty: 1-year Dynojet manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eCARB status: 50-state legal for 2021-2022 Touring\/Softail. For other model years, not legal for sale or use in California — confirm before ordering if California-registered.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynojet","offers":[{"title":"Default Title","offer_id":53321363882297,"sku":"DOJPV4-15-03","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/4e3302564f523c50d99eff2264cbb77dL.png?v=1779569486"},{"product_id":"progressive-11-1525-fork-spring","title":"2006-2017 Harley-Davidson Softail\/Dyna Progressive Fork Springs","description":"\u003cp\u003eThe original progressive-rate fork springs soak up small road chatter while staying firm enough to absorb hard hits. Spring rates are matched to the application for improved front-end control, reduced brake dive, and a more planted ride than worn or stock springs.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProgressive-rate spring design\u003c\/li\u003e\n\u003cli\u003eReduces front-end dive under braking\u003c\/li\u003e\n\u003cli\u003eApplication-matched spring rates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of fork springs\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eInstallation requires draining and refilling the fork oil; oil is not included.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpring rate: 35\/50 lb\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365208842553,"sku":"PGR11-1525","price":123.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/8bdd59ec69215c61261a06fe1bbdcb41_0f234ffe-1972-433c-8d05-7402a068cf47.jpg?v=1780800238"},{"product_id":"progressive-fork-preload-adjuster-kit-49mm","title":"2006-2024 Harley-Davidson Touring\/Softail\/Dyna Progressive Fork Preload Adjuster Kit 49mm","description":"\u003cp\u003eAdd fork preload adjustment to dial in the front end: increase preload to firm up the fork for aggressive riding, or back it off for relaxed cruising. Adjustability also restores correct front sag when switching between solo and two-up riding.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal fork preload adjustment\u003c\/li\u003e\n\u003cli\u003eRestores correct sag for solo or two-up loads\u003c\/li\u003e\n\u003cli\u003eMachined aluminum construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePreload adjuster caps for both fork legs\u003c\/li\u003e\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365211824441,"sku":"PGR31-5056","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/40cfc08f7b8d238c699ebc416a2a4d18.jpg?v=1780800263"},{"product_id":"progressive-harley-davidson-412-series-shocks-12-0in-black","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 12in Standard Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 12\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSpring rate: 210\/250 lbs\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365212676409,"sku":"PGR412-4036B","price":379.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_52c3f5b6-6dd8-4485-8369-ab859aa52aef.jpg?v=1780800274"},{"product_id":"progressive-harley-davidson-412-series-shocks-11-0in-black","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 11in Standard Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 11\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSpring rate: 230\/275 lbs\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365212741945,"sku":"PGR412-4037B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_a7b8f124-912c-402f-ae10-0bffb74c6d65.jpg?v=1780800274"},{"product_id":"progressive-harley-davidson-412-series-shocks-11-0in-chrome","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 11in Standard Chrome (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 11\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Chrome\u003c\/li\u003e\n\u003cli\u003eSpring rate: 230\/275 lbs\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365212807481,"sku":"PGR412-4037C","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_36cf677e-21c1-4521-983a-c9a81dd2e777.jpg?v=1780800276"},{"product_id":"progressive-harley-davidson-412-series-shocks-12-6in-black","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 12.6in Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 12.6\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSpring rate: 210\/250 lbs\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365212873017,"sku":"PGR412-4038B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_415315ef-25fd-49cd-bb78-005855775c48.jpg?v=1780800277"},{"product_id":"progressive-harley-davidson-412-series-shocks-12-0in-black-1","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 12in Heavy Duty Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 12\"\u003c\/li\u003e\n\u003cli\u003eDuty: Heavy Duty\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSpring rate: 300\/350 lbs\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365212938553,"sku":"PGR412-4044B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_b47d6c61-aaca-4ac8-869b-814abd7d3399.jpg?v=1780800278"},{"product_id":"progressive-harley-davidson-412-series-shocks-11-0in-black-1","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 11in Heavy Duty Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 11\"\u003c\/li\u003e\n\u003cli\u003eDuty: Heavy Duty\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSpring rate: 300\/350 lbs\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365213004089,"sku":"PGR412-4045B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_d6fc43ac-9a32-4232-af25-25003342fc96.jpg?v=1780800278"},{"product_id":"progressive-harley-davidson-412-series-shocks-11-0in-chrome-1","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 11in Heavy Duty Chrome (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 11\"\u003c\/li\u003e\n\u003cli\u003eDuty: Heavy Duty\u003c\/li\u003e\n\u003cli\u003eFinish: Chrome\u003c\/li\u003e\n\u003cli\u003eSpring rate: 300\/350 lbs\/in progressive\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365213069625,"sku":"PGR412-4045C","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_dc9dd6e3-2811-4fd5-b990-335ac25f279b.jpg?v=1780800279"},{"product_id":"progressive-harley-davidson-412-series-shocks-13-5in-black-5","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 13.5in Standard Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 13.5\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365214740793,"sku":"PGR412-4083B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/198cd6cbdae80a0676048ef02eb426efL_849dff2a-9a9a-405a-8a13-19c8cc60ead3.jpg?v=1780800295"},{"product_id":"progressive-harley-davidson-412-series-shocks-13-5in-black-6","title":"1992-2017 Harley-Davidson Dyna Progressive 412 Series Shocks 13.5in Heavy Duty Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 13.5\"\u003c\/li\u003e\n\u003cli\u003eDuty: Heavy Duty\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365214904633,"sku":"PGR412-4084B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_f1ffb943-b525-42a0-a4de-ff7aab62c416.jpg?v=1780800295"},{"product_id":"progressive-harley-davidson-412-series-shocks-14-0in-black","title":"1992-2009 Harley-Davidson Dyna Progressive 412 Series Shocks 14in Standard Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 14\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365214970169,"sku":"PGR412-4085B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_efcec34d-62ab-49b5-ad2a-f18be6051db8.jpg?v=1780800296"},{"product_id":"progressive-harley-davidson-412-series-shocks-14-0in-black-1","title":"1992-2009 Harley-Davidson Dyna Progressive 412 Series Shocks 14in Heavy Duty Black (Pair)","description":"\u003cp\u003eThe Progressive 412 Series is a double-wall steel body shock with nitrogen-charged, multi-stage velocity-sensitive valving for smooth, consistent damping. A five-position cam-style preload adjuster lets you set the ride for solo, two-up, or loaded touring without special tools.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-wall steel shock body\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged, multi-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eFive-position cam-style spring preload adjuster\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil springs\u003c\/li\u003e\n\u003cli\u003eAvailable in standard and heavy-duty spring rates\u003c\/li\u003e\n\u003cli\u003eChrome or black finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 14\"\u003c\/li\u003e\n\u003cli\u003eDuty: Heavy Duty\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365215134009,"sku":"PGR412-4086B","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2442eec671ba599aef478efe5cdd91f2_27ea2044-a6bd-49e0-a43b-918e96f22a42.jpg?v=1780800297"},{"product_id":"progressive-harley-davidson-444-series-shocks-12-5in-chrome","title":"1992-2017 Harley-Davidson Dyna Progressive 444 Series Shocks 12.5in Chrome (Pair)","description":"\u003cp\u003eThe 444 Series is built around Progressive Suspension's patented Frequency Sensing Technology (FST), which reads bump frequency and adjusts damping in real time, routing oil through dedicated ports to absorb both small chatter and big hits. A top-mount threaded preload adjuster allows fine-tuning with a simple twist of the cap.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFrequency Sensing Technology (FST) self-adjusting damping\u003c\/li\u003e\n\u003cli\u003eTop-mount threaded preload adjuster, no tools required\u003c\/li\u003e\n\u003cli\u003eProgressive-rate main springs\u003c\/li\u003e\n\u003cli\u003eAvailable in Standard, Heavy Duty, and Super Heavy Duty configurations\u003c\/li\u003e\n\u003cli\u003eHand-built, tuned, and dyno-tested\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 12.5\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Chrome\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365217362233,"sku":"PGR444-4038C","price":860.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/44be544f30218484cfbb4574b15a2f83_50408833-8615-4819-8ff0-ec5f1a3ec2c9.jpg?v=1780800315"},{"product_id":"progressive-18-up-harley-davidson-softail-465-series-shocks-13-5in-black","title":"2018-2024 Harley-Davidson Softail Progressive 465 Series Shocks 13.5in Black (Pair)","description":"\u003cp\u003eThe 465 Series is a high-pressure gas monotube shock designed for Milwaukee-Eight Softail models. A large 46mm bore with deflective disc damping, a threaded body, and a five-position rebound adjuster deliver precise control, while the 16mm hard-chrome shaft rides on Viton seals for a low-friction, leak-free service life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-pressure gas monotube design\u003c\/li\u003e\n\u003cli\u003e46mm bore with deflective disc damping\u003c\/li\u003e\n\u003cli\u003eThreaded body preload adjustment\u003c\/li\u003e\n\u003cli\u003eFive-position rebound adjuster\u003c\/li\u003e\n\u003cli\u003e16mm hard-chrome shaft with Viton seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 13.5\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365218541881,"sku":"PGR465-1184B","price":822.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/991cf47794776ab24f57c5edc204e5d1.jpg?v=1780800329"},{"product_id":"progressive-18-up-harley-davidson-softail-465-series-shocks-12-2in-heavy-duty-black","title":"2018-2024 Harley-Davidson Softail Progressive 465 Series Shocks 12.2in Heavy Duty Black (Pair)","description":"\u003cp\u003eThe 465 Series is a high-pressure gas monotube shock designed for Milwaukee-Eight Softail models. A large 46mm bore with deflective disc damping, a threaded body, and a five-position rebound adjuster deliver precise control, while the 16mm hard-chrome shaft rides on Viton seals for a low-friction, leak-free service life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-pressure gas monotube design\u003c\/li\u003e\n\u003cli\u003e46mm bore with deflective disc damping\u003c\/li\u003e\n\u003cli\u003eThreaded body preload adjustment\u003c\/li\u003e\n\u003cli\u003eFive-position rebound adjuster\u003c\/li\u003e\n\u003cli\u003e16mm hard-chrome shaft with Viton seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 12.2\"\u003c\/li\u003e\n\u003cli\u003eDuty: Heavy Duty\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365218607417,"sku":"PGR465-1191B","price":822.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/991cf47794776ab24f57c5edc204e5d1_9df283ec-64e3-4911-9b61-1d74545e37db.jpg?v=1780800330"},{"product_id":"progressive-06-17-harley-davidson-dyna-494-series-shocks-12-5in-bearing-black","title":"2006-2017 Harley-Davidson Dyna Progressive 494 Series Shocks 12.5in Bearing Mount Black (Pair)","description":"\u003cp\u003eThe 494 Sport Series is a high-pressure monotube shock with deflective disc damping, hand-threaded preload, and external rebound adjustment. A progressive-rate spring keeps performance consistent across real-world conditions, and an engineered jounce bumper with a built-in metal cup smooths and controls bottoming.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-pressure gas monotube with deflective disc damping\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum body\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping\u003c\/li\u003e\n\u003cli\u003eHand-threaded spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil spring\u003c\/li\u003e\n\u003cli\u003eEngineered jounce bumper with built-in metal cup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 12.5\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365219164473,"sku":"PGR494-1001","price":879.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/2a618f8890c245593f59b16d22f5e73d.png?v=1780800337"},{"product_id":"progressive-06-17-harley-davidson-dyna-494-series-shocks-13-5in-bearing-black","title":"2006-2017 Harley-Davidson Dyna Progressive 494 Series Shocks 13.5in Bearing Mount Black (Pair)","description":"\u003cp\u003eThe 494 Sport Series is a high-pressure monotube shock with deflective disc damping, hand-threaded preload, and external rebound adjustment. A progressive-rate spring keeps performance consistent across real-world conditions, and an engineered jounce bumper with a built-in metal cup smooths and controls bottoming.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-pressure gas monotube with deflective disc damping\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum body\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping\u003c\/li\u003e\n\u003cli\u003eHand-threaded spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil spring\u003c\/li\u003e\n\u003cli\u003eEngineered jounce bumper with built-in metal cup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 13.5\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365219230009,"sku":"PGR494-1002","price":879.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/d05c84a1eceb5d45cce388935f6885f7.png?v=1780800338"},{"product_id":"progressive-06-09-harley-davidson-dyna-494-series-shocks-14-0in-bearing-black","title":"2006-2009 Harley-Davidson Dyna Progressive 494 Series Shocks 14in Bearing Mount Black (Pair)","description":"\u003cp\u003eThe 494 Sport Series is a high-pressure monotube shock with deflective disc damping, hand-threaded preload, and external rebound adjustment. A progressive-rate spring keeps performance consistent across real-world conditions, and an engineered jounce bumper with a built-in metal cup smooths and controls bottoming.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-pressure gas monotube with deflective disc damping\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum body\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping\u003c\/li\u003e\n\u003cli\u003eHand-threaded spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eProgressive-rate coil spring\u003c\/li\u003e\n\u003cli\u003eEngineered jounce bumper with built-in metal cup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 14\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365219426617,"sku":"PGR494-1011","price":879.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/3238803da09f121b1fc39e63cac98b41.png?v=1780800341"},{"product_id":"progressive-harley-davidson-dyna-990-series-shocks-13-5in-black","title":"2006-2017 Harley-Davidson Dyna Progressive 990 Series Shocks 13.5in Black (Pair)","description":"\u003cp\u003eThe 990 Series is the most adjustable shock in the V-twin market: ride height adjusts via a 0.4\" adjustable eyelet, with external rebound damping, high- and low-speed compression damping on easily accessible knobs, and threaded hand-adjustable spring preload. A high-pressure monotube routes deflective disc damping through two independent circuits for a consistent feel through the full damper stroke.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.4\" adjustable-height eyelet\u003c\/li\u003e\n\u003cli\u003eExternal rebound damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndependent high- and low-speed compression adjusters\u003c\/li\u003e\n\u003cli\u003eThreaded hand-adjustable spring preload\u003c\/li\u003e\n\u003cli\u003eHigh-pressure monotube with dual damping circuits\u003c\/li\u003e\n\u003cli\u003eCaptured-design jounce bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePair of shocks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before installing shocks of a different length than stock, confirm that wheel and suspension travel can change without creating clearance issues.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended length: 13.5\"\u003c\/li\u003e\n\u003cli\u003eDuty: Standard\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Progressive","offers":[{"title":"Default Title","offer_id":53365220606265,"sku":"PGR990-1002","price":1896.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/7e336778140beb8bfff4179dea486f4c.jpg?v=1780800355"}],"url":"https:\/\/tires-fast.com\/collections\/harley-davidson-fat-bob.oembed","provider":"Tires Fast","version":"1.0","type":"link"}