{"title":"Motorcycle Suspension","description":"","products":[{"product_id":"ohlins-97-13-h-d-touring-flhx-fltx-showa-fkc100-cartridge-kit-incl-springs-08419-10-08421-13","title":"1997-2013 Harley-Davidson Touring Öhlins FKC 100 Front Fork Cartridge Kit (Showa)","description":"\u003cp\u003eÖhlins FKC 100 front fork cartridge kit for Harley-Davidson Touring, 1997-2013. An Öhlins-grade upgrade for the OEM front fork internals on the pre-Milwaukee-Eight Touring platform, delivering improved damping over the long service life of the Twin Cam and earlier Touring chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShowa fork only.\u003c\/strong\u003e This cartridge kit fits the Showa-equipped front fork variant used on Harley Touring models in this era. Confirm your fork is the Showa variant before ordering.\u003c\/p\u003e\n\n\u003cp\u003eThe FKC series is the predecessor to Öhlins's current NIX architecture and uses an internal cartridge that bolts into the original fork tubes. Damping and preload are adjusted at the fork caps. This kit is the right choice for owners maintaining or upgrading earlier Touring models who want Öhlins damping authority without the cost of a complete fork replacement.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFKC cartridge architecture with rebound damping adjustment\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins FKC 100 cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits Showa forks only. Confirm fork brand before ordering — physical fitment will not work on other fork architectures.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. Öhlins publishes a fitment guide for the correct spring rate by rider weight.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins FKC 100\u003c\/li\u003e\n\u003cli\u003eFitment: Showa-equipped forks only (1997-2013 Touring)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556235065,"sku":"OHLFKC 101","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/312facb89c778b692015387633c24da0.jpg?v=1778950344"},{"product_id":"ohlins-18-22-harley-softail-showa-nix-22-cartridge-kit-incl-springs-08444-90-10-11","title":"2018-2022 Harley-Davidson Softail Öhlins NIX 22 Front Fork Cartridge Kit (Showa)","description":"\u003cp\u003eÖhlins NIX 22 front fork cartridge kit for Harley-Davidson Softail, 2018-2022. A drop-in upgrade for the OEM front fork internals, delivering Öhlins-grade compression and rebound damping without replacing the complete fork assembly.\u003c\/p\u003e\n\n\u003cp\u003eFKS 221 fits multiple 2018-2022 M8 Softail sub-models with the Showa front fork. See the fitment table on the product page (or contact Öhlins technical support) to confirm fitment for your specific bike.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShowa fork only.\u003c\/strong\u003e This cartridge kit fits the Showa-equipped front fork variant. Confirm your fork is the Showa variant before ordering — Harley shipped multiple fork brands across the year range and these cartridges will not fit other fork architectures.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX architecture separates compression and rebound damping between the left and right fork legs — compression in one leg, rebound in the other — for more precise damping control than the OEM internals. Adjustments are made at the fork cap, alongside the spring preload. The cartridges install bolt-in into the original fork tubes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNIX damping architecture with isolated compression (left leg) and rebound (right leg) circuits\u003c\/li\u003e\n\u003cli\u003e22mm damping piston\u003c\/li\u003e\n\u003cli\u003eExternal compression and rebound damping adjusters at the fork caps\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original Öhlins-compatible fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins NIX 22 cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see the fitment guide on Öhlins's website or call Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits Showa forks only. Confirm fork brand before ordering — physical fitment will not work on other fork architectures.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. The correct spring rate depends on rider weight; Öhlins publishes a fitment guide and Öhlins USA technical support can recommend the right spring for your application.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately. Öhlins publishes a recommended oil specification for these cartridges.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins NIX 22\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 22mm\u003c\/li\u003e\n\u003cli\u003eFitment: Showa-equipped forks only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556366137,"sku":"OHLFKS 221","price":1263.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/5e619bef049468394778f3d46c7868b4.jpg?v=1778950347"},{"product_id":"ohlins-17-23-harley-touring-flhx-fltx-showa-nix-22-cartridge-kit-incl-springs-04744-12-13","title":"2017-2024 Harley-Davidson Touring Öhlins NIX 22 Front Fork Cartridge Kit (Showa)","description":"\u003cp\u003eÖhlins NIX 22 front fork cartridge kit for Harley-Davidson Touring, 2017-2024. A drop-in upgrade for the OEM front fork internals, delivering Öhlins-grade compression and rebound damping without replacing the complete fork assembly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShowa fork only.\u003c\/strong\u003e This cartridge kit fits the Showa-equipped front fork variant. Confirm your fork is the Showa variant before ordering — Harley shipped multiple fork brands across the year range and these cartridges will not fit other fork architectures.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX architecture separates compression and rebound damping between the left and right fork legs — compression in one leg, rebound in the other — for more precise damping control than the OEM internals. Adjustments are made at the fork cap, alongside the spring preload. The cartridges install bolt-in into the original fork tubes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNIX damping architecture with isolated compression (left leg) and rebound (right leg) circuits\u003c\/li\u003e\n\u003cli\u003e22mm damping piston\u003c\/li\u003e\n\u003cli\u003eExternal compression and rebound damping adjusters at the fork caps\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original Öhlins-compatible fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins NIX 22 cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see the fitment guide on Öhlins's website or call Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits Showa forks only. Confirm fork brand before ordering — physical fitment will not work on other fork architectures.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. The correct spring rate depends on rider weight; Öhlins publishes a fitment guide and Öhlins USA technical support can recommend the right spring for your application.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately. Öhlins publishes a recommended oil specification for these cartridges.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins NIX 22\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 22mm\u003c\/li\u003e\n\u003cli\u003eFitment: Showa-equipped forks only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556431673,"sku":"OHLFKS 228","price":1263.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/1908afcd15bd8e6ef196556466fc749b.jpg?v=1778950347"},{"product_id":"ohlins-18-22-harley-softail-fat-bobshowanix-30-street-cartridge-kit-incl-springs-08444-95-10-11","title":"2018-2022 Harley-Davidson Softail Fat Bob Öhlins NIX 30 Street Front Fork Cartridge Kit (Showa)","description":"\u003cp\u003eÖhlins NIX 30 Street front fork cartridge kit for Harley-Davidson Softail Fat Bob, 2018-2022. A drop-in upgrade for the OEM front fork internals, delivering Öhlins-grade compression and rebound damping without replacing the complete fork assembly.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX 30 platform uses a larger 30mm damping piston than the NIX 22 cartridge kits used elsewhere in the Öhlins Softail lineup — the larger piston delivers more oil flow and damping authority, tuned specifically for the Fat Bob's chassis and wider front-end use case.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShowa fork only.\u003c\/strong\u003e This cartridge kit fits the Showa-equipped front fork variant. Confirm your fork is the Showa variant before ordering — Harley shipped multiple fork brands across the year range and these cartridges will not fit other fork architectures.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX architecture separates compression and rebound damping between the left and right fork legs — compression in one leg, rebound in the other — for more precise damping control than the OEM internals. Adjustments are made at the fork cap, alongside the spring preload. The cartridges install bolt-in into the original fork tubes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNIX damping architecture with isolated compression (left leg) and rebound (right leg) circuits\u003c\/li\u003e\n\u003cli\u003e30mm damping piston\u003c\/li\u003e\n\u003cli\u003eExternal compression and rebound damping adjusters at the fork caps\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original Öhlins-compatible fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins NIX 30 Street cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see the fitment guide on Öhlins's website or call Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits Showa forks only. Confirm fork brand before ordering — physical fitment will not work on other fork architectures.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. The correct spring rate depends on rider weight; Öhlins publishes a fitment guide and Öhlins USA technical support can recommend the right spring for your application.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately. Öhlins publishes a recommended oil specification for these cartridges.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins NIX 30 Street\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 30mm\u003c\/li\u003e\n\u003cli\u003eFitment: Showa-equipped forks only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556497209,"sku":"OHLFKS 508","price":1373.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/bb8acc4eacf550409d59156df27e994c.jpg?v=1778950348"},{"product_id":"ohlins-90-13-harley-davidson-flh-flt-touring-stx-36-twin-shock-absorber-150-lb-max-500-lb","title":"1990-2013 Harley-Davidson Touring Öhlins STX 36 Twin Shock 150-500 lb (Pair)","description":"\u003cp\u003eÖhlins STX 36 Twin Shock rear shocks for Harley-Davidson Touring, 1990-2013. A premium suspension upgrade over stock dampers, engineered for ride comfort, load support, and long service life across the touring use case.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the top-tier fully-adjustable build in the STX 36 series — the only configuration with both compression and rebound damping adjustment. Spring rate is preset for a 150-500 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eExternal hose-mounted reservoir for consistent damping under sustained load\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 150-500 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Twin shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 150-500 lb weight range\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install to optimize ride comfort and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Twin (S36HR1C1L)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, external hose reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, compression, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 150-500 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556562745,"sku":"OHLHD 357","price":1648.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/5_95a02981-1d15-4fc0-979c-d7b0a6d2bf52.png?v=1778955349"},{"product_id":"ohlins-90-13-harley-davidson-flh-flt-touring-stx-36-twin-shock-absorber-min-250lb-max-575lb","title":"1990-2013 Harley-Davidson Touring Öhlins STX 36 Twin Shock 250-575 lb (Pair)","description":"\u003cp\u003eÖhlins STX 36 Twin Shock rear shocks for Harley-Davidson Touring, 1990-2013. A premium suspension upgrade over stock dampers, engineered for ride comfort, load support, and long service life across the touring use case.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the top-tier fully-adjustable build in the STX 36 series — the only configuration with both compression and rebound damping adjustment. Spring rate is preset for a 250-575 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eExternal hose-mounted reservoir for consistent damping under sustained load\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 250-575 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Twin shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 250-575 lb weight range\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install to optimize ride comfort and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Twin (S36HR1C1L)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, external hose reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, compression, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 250-575 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556628281,"sku":"OHLHD 357S2","price":1648.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/5_95a02981-1d15-4fc0-979c-d7b0a6d2bf52.png?v=1778955349"},{"product_id":"ohlins-90-26-harley-davidson-fl-touring-stx-36-blackline-13in-shocks-150lb-max-500lb","title":"1990-2016 Harley-Davidson Touring Öhlins STX 36 Blackline 13in 150-500 lb (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Touring, 1990-2016. A premium upgrade over the OEM rear suspension, engineered for ride comfort, control, and long service life on the road.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSister SKU to HD 776 (1990-2021 cohort) — this part number covers the narrower 1990-2016 fitment window. If your bike is 2017 or later, verify against the fitment table; HD 776 may be the correct part.\u003c\/p\u003e\n\n\u003cp\u003eThe Blackline series is Öhlins' Harley-specific finish on the STX 36 platform — all-black anodized hardware with gold detailing. This dividing-piston configuration integrates the reservoir into the shock body for a clean profile and adds rebound damping and length adjustment. Spring rate is preset for a 150-500 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile, no external hose)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 150-500 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 150-500 lb weight range\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install to optimize ride comfort and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36DR1L)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, dividing piston (integrated reservoir)\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 150-500 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556693817,"sku":"OHLHD 772","price":1153.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/776.png?v=1778955309"},{"product_id":"ohlins-90-26-harley-davidson-fl-touring-stx-36-blackline-13in-shocks-min-250lb-max-575lb","title":"1990-2021 Harley-Davidson Touring Öhlins STX 36 Blackline 13in 250-575 lb (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Touring, 1990-2021. A premium upgrade over the OEM rear suspension, engineered for ride comfort, control, and long service life on the road.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Blackline series is Öhlins' Harley-specific finish on the STX 36 platform — all-black anodized hardware with gold detailing. This dividing-piston configuration integrates the reservoir into the shock body for a clean profile and adds rebound damping and length adjustment. Spring rate is preset for a 250-575 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile, no external hose)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 250-575 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 250-575 lb weight range\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install to optimize ride comfort and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36DR1L)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, dividing piston (integrated reservoir)\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 250-575 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556792121,"sku":"OHLHD 772S2","price":1153.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/776.png?v=1778955309"},{"product_id":"ohlins-90-22-harley-davidson-fl-touring-stx-36-blackline-pair-weight-range-150-500lbs","title":"1990-2021 Harley-Davidson Touring Öhlins STX 36 Blackline 13in 150-500 lb (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Touring, 1990-2021. A premium upgrade over the OEM rear suspension, engineered for ride comfort, control, and long service life on the road.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Blackline series is Öhlins' Harley-specific finish on the STX 36 platform — all-black anodized hardware with gold detailing. This dividing-piston configuration integrates the reservoir into the shock body for a clean profile and adds rebound damping and length adjustment. Spring rate is preset for a 150-500 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile, no external hose)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 150-500 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 150-500 lb weight range\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install to optimize ride comfort and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36DR1L)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, dividing piston (integrated reservoir)\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 150-500 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556857657,"sku":"OHLHD 776","price":1153.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/776.png?v=1778955309"},{"product_id":"ohlins-90-22-harley-davidson-fl-touring-stx-36-blackline-shock-absorber","title":"1990-2021 Harley-Davidson Touring Öhlins STX 36 Blackline 13in Emulsion (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline Emulsion rear shocks for Harley-Davidson Touring, 1990-2021. The entry-tier option in the Öhlins Blackline series — a meaningful upgrade over stock dampers at the most accessible price point in the lineup.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Blackline series is Öhlins' Harley-specific finish on the STX 36 platform — all-black anodized hardware with gold detailing. The emulsion configuration uses a single-tube emulsion damper (gas and oil share the main body, no separate reservoir) and is preload-adjustable only. Spring rate is preset at the factory for the application.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eEmulsion damper design (single-tube, no separate reservoir)\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003ePreset spring rate for the application — no damping or length adjustment\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline Emulsion shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003cli\u003eThis is the entry configuration in the Öhlins STX 36 series. Riders carrying heavier loads or two-up frequently should consider the dividing-piston or fully-adjustable variants for additional damping control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline Emulsion (S36E)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube emulsion (single-tube, no separate reservoir), high-pressure nitrogen-charged\u003c\/li\u003e\n\u003cli\u003eAdjustment: preload only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300556923193,"sku":"OHLHD 777","price":768.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/776.png?v=1778955309"},{"product_id":"ohlins-23-25-harley-davidson-american-v-twin-48mm-blackline-front-fork","title":"2023-2025 Harley-Davidson Touring Öhlins 48mm Blackline Front Fork Assembly","description":"\u003cp\u003eÖhlins American V-Twin 48mm Blackline front fork assembly for Harley-Davidson Touring, 2023-2025. Öhlins's first complete front fork for Harley-Davidson — a full bolt-on fork replacement (not a cartridge kit) developed with technology from Öhlins's Bagger Racing program.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right fork legs \/ complete fork assembly).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe American V-Twin 48 Blackline replaces the entire OEM front fork. It uses Öhlins's 30mm NIX damping system internally, with compression damping isolated in one leg and rebound in the other for more precise damping control than the OEM fork. The 48mm fork tubes are titanium-nitrate-coated for reduced friction and a plusher ride, and the fork bottoms are weight- and stress-optimized for the M8 Touring chassis.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e48mm fork tubes with titanium-nitrate friction-reducing coating\u003c\/li\u003e\n\u003cli\u003eÖhlins 30mm NIX damping system — compression and rebound damping in separate legs\u003c\/li\u003e\n\u003cli\u003eExternal adjusters for compression, rebound, and preload at the fork caps\u003c\/li\u003e\n\u003cli\u003eWeight- and stress-optimized fork bottom design\u003c\/li\u003e\n\u003cli\u003eAll-black Blackline aesthetic with updated Öhlins branding\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Öhlins American V-Twin 48 Blackline front fork assembly (both fork legs)\u003c\/li\u003e\n\u003cli\u003ePre-installed springs and oil matched to the application\u003c\/li\u003e\n\u003cli\u003eMounting hardware as required for fork replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a complete fork replacement, not a cartridge kit. Installation requires removing the OEM front end (front wheel, front fender, brake calipers, lower triple clamp components) and installing the Öhlins assembly.\u003c\/li\u003e\n\u003cli\u003eInstallation by a qualified suspension or Harley shop is strongly recommended. Initial sag setting and front-end alignment should be verified after installation.\u003c\/li\u003e\n\u003cli\u003eVerify your bike's year and model against the Öhlins fitment guide before ordering. This fork is specific to the 2023-2025 M8 Touring chassis and is not interchangeable with earlier Touring platforms or other Harley families.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins American V-Twin 48 Blackline (FGRT 307)\u003c\/li\u003e\n\u003cli\u003eFork tube diameter: 48mm\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 30mm\u003c\/li\u003e\n\u003cli\u003eDamping architecture: NIX (compression isolated in one leg, rebound in the other)\u003c\/li\u003e\n\u003cli\u003eCoating: Titanium nitrate on inner tubes\u003c\/li\u003e\n\u003cli\u003eAdjustment: external compression, rebound, and preload at the fork caps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300567048505,"sku":"OHLFGRT 307","price":4398.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/68efb96a056d04d80385e4738ca139eeL.jpg?v=1778951145"},{"product_id":"ohlins-18-22-harley-softail-fat-boy-showa-nix-22-cust-heritage-cartridge-kt-incl-springs-notes","title":"2018-2022 Harley-Davidson Softail Fat Boy Öhlins NIX 22 Front Fork Cartridge Kit (Showa)","description":"\u003cp\u003eÖhlins NIX 22 front fork cartridge kit for Harley-Davidson Softail Fat Boy, 2018-2022. A drop-in upgrade for the OEM front fork internals, delivering Öhlins-grade compression and rebound damping without replacing the complete fork assembly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShowa fork only.\u003c\/strong\u003e This cartridge kit fits the Showa-equipped front fork variant. Confirm your fork is the Showa variant before ordering — Harley shipped multiple fork brands across the year range and these cartridges will not fit other fork architectures.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX architecture separates compression and rebound damping between the left and right fork legs — compression in one leg, rebound in the other — for more precise damping control than the OEM internals. Adjustments are made at the fork cap, alongside the spring preload. The cartridges install bolt-in into the original fork tubes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNIX damping architecture with isolated compression (left leg) and rebound (right leg) circuits\u003c\/li\u003e\n\u003cli\u003e22mm damping piston\u003c\/li\u003e\n\u003cli\u003eExternal compression and rebound damping adjusters at the fork caps\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original Öhlins-compatible fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins NIX 22 cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see the fitment guide on Öhlins's website or call Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits Showa forks only. Confirm fork brand before ordering — physical fitment will not work on other fork architectures.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. The correct spring rate depends on rider weight; Öhlins publishes a fitment guide and Öhlins USA technical support can recommend the right spring for your application.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately. Öhlins publishes a recommended oil specification for these cartridges.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins NIX 22\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 22mm\u003c\/li\u003e\n\u003cli\u003eFitment: Showa-equipped forks only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300568228153,"sku":"OHLFKS 222","price":1263.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/4b1bf9448f5f7ac51d901bd0161cc2e6L_cef00376-8299-4eab-a1a2-046eea61945f.jpg?v=1778951160"},{"product_id":"ohlins-14-16-harley-touring-flhx-fltx-showa-nix-22-cust-herit-cartridge-kit-incl-springs-notes","title":"2014-2016 Harley-Davidson Touring Öhlins NIX 22 Front Fork Cartridge Kit (Showa)","description":"\u003cp\u003eÖhlins NIX 22 front fork cartridge kit for Harley-Davidson Touring, 2014-2016. A drop-in upgrade for the OEM front fork internals, delivering Öhlins-grade compression and rebound damping without replacing the complete fork assembly.\u003c\/p\u003e\n\n\u003cp\u003eNote: FKS 226 fits all 2014-2016 Harley FL Touring models with the Showa front fork (Road Glide, Street Glide, Electra Glide, Road King, Ultra Classic). Tri Glide models are NOT supported by this kit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShowa fork only.\u003c\/strong\u003e This cartridge kit fits the Showa-equipped front fork variant. Confirm your fork is the Showa variant before ordering — Harley shipped multiple fork brands across the year range and these cartridges will not fit other fork architectures.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX architecture separates compression and rebound damping between the left and right fork legs — compression in one leg, rebound in the other — for more precise damping control than the OEM internals. Adjustments are made at the fork cap, alongside the spring preload. The cartridges install bolt-in into the original fork tubes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNIX damping architecture with isolated compression (left leg) and rebound (right leg) circuits\u003c\/li\u003e\n\u003cli\u003e22mm damping piston\u003c\/li\u003e\n\u003cli\u003eExternal compression and rebound damping adjusters at the fork caps\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original Öhlins-compatible fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins NIX 22 cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see the fitment guide on Öhlins's website or call Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits Showa forks only. Confirm fork brand before ordering — physical fitment will not work on other fork architectures.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. The correct spring rate depends on rider weight; Öhlins publishes a fitment guide and Öhlins USA technical support can recommend the right spring for your application.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately. Öhlins publishes a recommended oil specification for these cartridges.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins NIX 22\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 22mm\u003c\/li\u003e\n\u003cli\u003eFitment: Showa-equipped forks only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300568293689,"sku":"OHLFKS 226","price":1263.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/4b1bf9448f5f7ac51d901bd0161cc2e6L_bfa83dd0-2753-426e-9fe6-47fb272bb50a.jpg?v=1778951162"},{"product_id":"ohlins-23-24-harley-cvo-road-glide-nix-30-cartridge-kt-incl-springs-08444-12-13-14","title":"2023-2025 Harley-Davidson Touring Öhlins NIX 30 Front Fork Cartridge Kit (Inverted Fork)","description":"\u003cp\u003eÖhlins NIX 30 front fork cartridge kit for Harley-Davidson CVO Touring models with the factory inverted (USD) front fork, 2023-2025. A drop-in upgrade for the OEM front fork internals, delivering Öhlins-grade compression and rebound damping without replacing the complete fork assembly.\u003c\/p\u003e\n\n\u003cp\u003eThis cartridge kit fits the revised CVO Touring front-end architecture introduced for the 2024 model year — used on the CVO Road Glide, CVO Road Glide ST, and CVO Street Glide with the 19-inch front wheel and factory inverted forks. This is one of the few non-Showa cartridge kits in the Öhlins HD lineup, since the 2024+ CVO Touring front-end uses inverted (USD) forks rather than the Showa conventional forks found elsewhere in the catalog. Confirm your bike's year and fork configuration against the Öhlins fitment guide before ordering.\u003c\/p\u003e\n\n\u003cp\u003eThe NIX architecture separates compression and rebound damping between the left and right fork legs — compression in one leg, rebound in the other — for more precise damping control than the OEM internals. Adjustments are made at the fork cap, alongside the spring preload. The cartridges install bolt-in into the original fork tubes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNIX damping architecture with isolated compression (left leg) and rebound (right leg) circuits\u003c\/li\u003e\n\u003cli\u003e30mm damping piston\u003c\/li\u003e\n\u003cli\u003eExternal compression and rebound damping adjusters at the fork caps\u003c\/li\u003e\n\u003cli\u003eSpring preload adjustment at the fork caps\u003c\/li\u003e\n\u003cli\u003eInstalls into the original Öhlins-compatible fork tubes — no fork replacement required\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÖhlins NIX 30 cartridge kit (both fork legs)\u003c\/li\u003e\n\u003cli\u003eSprings are not included with the cartridge kit. Öhlins springs are selected to match individual rider weight and are ordered separately — see the fitment guide on Öhlins's website or call Öhlins USA technical support for the correct spring rate.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and seals as required for cartridge installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a fork-internals replacement and requires complete fork disassembly. Installation by an Öhlins-certified suspension shop is strongly recommended for buyers without prior fork-service experience.\u003c\/li\u003e\n\u003cli\u003eThis kit fits the factory inverted (USD) front forks used on 2023-2025 CVO Touring models with the 19-inch front wheel. CVO Road Glide ST coverage starts in 2024. Verify your fork configuration before ordering — this kit will not fit non-CVO Touring bikes or the Showa conventional forks used elsewhere in the lineup.\u003c\/li\u003e\n\u003cli\u003eSprings are required for installation and must be purchased separately. The correct spring rate depends on rider weight; Öhlins publishes a fitment guide and Öhlins USA technical support can recommend the right spring for your application.\u003c\/li\u003e\n\u003cli\u003eFront fork oil is consumed during installation and must be purchased separately. Öhlins publishes a recommended oil specification for these cartridges — approximately 2 liters of Öhlins 1309 fork oil is required per the manufacturer.\u003c\/li\u003e\n\u003cli\u003eThis kit is part of a system — the complete suspension upgrade requires the cartridge kit plus springs plus fork oil, ordered together for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins NIX 30\u003c\/li\u003e\n\u003cli\u003eDamping piston diameter: 30mm\u003c\/li\u003e\n\u003cli\u003eFitment: Factory inverted (USD) front forks on 2023-2025 CVO Touring models with 19-inch front wheel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300568359225,"sku":"OHLFKS 527","price":1373.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/4fea59922ce2ad03f383d8bae47f50d1L.jpg?v=1778951162"},{"product_id":"ohlins-14-26-harley-fl-touring-stx-36-twin-blackline-12in-blk-reservoir-shocks-standard-springs","title":"2014-2024 Harley-Davidson Touring Öhlins STX Pro 12in Black Reservoir Shocks 150-500 lb (Pair)","description":"\u003cp\u003eÖhlins STX Pro Black Reservoir rear shocks for Harley-Davidson Touring, 2014-2024. The all-black configuration of the STX Pro Blackline series — same fully-adjustable damping and proven STX 36 platform, finished with a matte black reservoir for a uniform blacked-out look.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis variant matches the STX Pro Blackline mechanically but swaps the standard gold reservoirs for black reservoirs and black hoses, with the iconic Öhlins \"Ö\" logo on the reservoir. The half-inch ID bushings allow direct fitment without sleeves. Spring rate is preset for a 150-500 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eExternal hose-mounted reservoir in matte black finish\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eHalf-inch ID bushings for direct fitment — no sleeves required\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms (included)\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 150-500 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX Pro Black Reservoir shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 150-500 lb weight range\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or sleeves required (half-inch ID bushings).\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003cli\u003eReservoir brackets mount to the saddlebag support hardware — confirm clearance for aftermarket bags or trunk setups before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX Pro Black Reservoir\u003c\/li\u003e\n\u003cli\u003eLength: 12in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, external hose reservoir (black)\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, compression, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 150-500 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300568424761,"sku":"OHLHD 050","price":1758.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/0a9b76afc6ed604b219fbacb15c47b3cL.jpg?v=1778951163"},{"product_id":"ohlins-18-24-harley-softail-stx-46-shock-13in","title":"2019-2023 Harley-Davidson Softail FXDR 114 Öhlins STX 46 Shock 13in","description":"\u003cp\u003eÖhlins STX 46 rear shock for Harley-Davidson Softail FXDR 114, 2019-2023. A premium suspension upgrade over the OEM single rear shock used on the post-2018 M8 Softail chassis, with significantly improved compliance and adjustability for the way these bikes actually get ridden.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a single rear shock. The 2018+ M8 Softail platform uses one rear shock — not a pair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eHD 513 also fits 2018-2023 Softail Breakout, Fat Boy, and Sport Glide models per Öhlins USA's fitment guide. Verify your model and year before ordering.\u003c\/p\u003e\n\n\u003cp\u003eThe STX 46 uses a 46mm main piston (vs the 36mm used in the Touring twin-shock line) for greater oil flow and damping authority on the heavier single-shock chassis. The hydraulic preload adjuster allows preload changes by hand — no tools needed — to accommodate rider weight changes, two-up riding, or cargo loading.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e46mm main piston for increased oil flow and damping authority\u003c\/li\u003e\n\u003cli\u003eMonotube design with internal gas reservoir in the shock body\u003c\/li\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged\u003c\/li\u003e\n\u003cli\u003eHydraulic spring preload adjuster (tool-free)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping\u003c\/li\u003e\n\u003cli\u003eAdjustable shock length for ride-height tuning\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) Öhlins STX 46 rear shock absorber\u003c\/li\u003e\n\u003cli\u003ePre-installed spring matched to the application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shock. No frame modifications required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install. The hydraulic preload adjuster makes ongoing adjustment straightforward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 46\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 46mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, internal gas reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound damping, length, hydraulic preload\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569211193,"sku":"OHLHD 513","price":1098.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/79b2d980f32a05c5b3615d20d90f1e60L.jpg?v=1778951173"},{"product_id":"ohlins-18-23-harley-softail-low-rider-stx-46-shock-13in","title":"2018-2024 Harley-Davidson Softail Öhlins STX 46 Shock 13in","description":"\u003cp\u003eÖhlins STX 46 rear shock for Harley-Davidson Softail M8 platform, 2018-2024. A premium suspension upgrade over the OEM single rear shock used on the post-2018 M8 Softail chassis, with significantly improved compliance and adjustability for the way these bikes actually get ridden.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a single rear shock. The 2018+ M8 Softail platform uses one rear shock — not a pair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eHD 514 fits the 2018+ M8 Softail family — including Deluxe, Low Rider, Low Rider S, Slim, and Street Bob — per Öhlins's fitment guide. Verify your specific model and year against the Öhlins catalog before ordering.\u003c\/p\u003e\n\n\u003cp\u003eThe STX 46 uses a 46mm main piston (vs the 36mm used in the Touring twin-shock line) for greater oil flow and damping authority on the heavier single-shock chassis. The hydraulic preload adjuster allows preload changes by hand — no tools needed — to accommodate rider weight changes, two-up riding, or cargo loading.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e46mm main piston for increased oil flow and damping authority\u003c\/li\u003e\n\u003cli\u003eMonotube design with internal gas reservoir in the shock body\u003c\/li\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged\u003c\/li\u003e\n\u003cli\u003eHydraulic spring preload adjuster (tool-free)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping\u003c\/li\u003e\n\u003cli\u003eAdjustable shock length for ride-height tuning\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) Öhlins STX 46 rear shock absorber\u003c\/li\u003e\n\u003cli\u003ePre-installed spring matched to the application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shock. No frame modifications required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install. The hydraulic preload adjuster makes ongoing adjustment straightforward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 46\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 46mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, internal gas reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound damping, length, hydraulic preload\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569276729,"sku":"OHLHD 514","price":1098.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/79b2d980f32a05c5b3615d20d90f1e60L_4b7b1a15-db19-4fdf-b6eb-0f6e6b4cdab5.jpg?v=1778951174"},{"product_id":"ohlins-18-24-harley-softail-heritage-classic-stx-46-shock-13in","title":"2018-2023 Harley-Davidson Softail Heritage Classic Öhlins STX 46 Shock 13in","description":"\u003cp\u003eÖhlins STX 46 rear shock for Harley-Davidson Softail Heritage Classic, 2018-2023. A premium suspension upgrade over the OEM single rear shock used on the post-2018 M8 Softail chassis, with significantly improved compliance and adjustability for the way these bikes actually get ridden.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a single rear shock. The 2018+ M8 Softail platform uses one rear shock — not a pair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe STX 46 uses a 46mm main piston (vs the 36mm used in the Touring twin-shock line) for greater oil flow and damping authority on the heavier single-shock chassis. The hydraulic preload adjuster allows preload changes by hand — no tools needed — to accommodate rider weight changes, two-up riding, or cargo loading.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e46mm main piston for increased oil flow and damping authority\u003c\/li\u003e\n\u003cli\u003eMonotube design with internal gas reservoir in the shock body\u003c\/li\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged\u003c\/li\u003e\n\u003cli\u003eHydraulic spring preload adjuster (tool-free)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping\u003c\/li\u003e\n\u003cli\u003eAdjustable shock length for ride-height tuning\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) Öhlins STX 46 rear shock absorber\u003c\/li\u003e\n\u003cli\u003ePre-installed spring matched to the application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shock. No frame modifications required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install. The hydraulic preload adjuster makes ongoing adjustment straightforward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 46\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 46mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, internal gas reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound damping, length, hydraulic preload\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569407801,"sku":"OHLHD 516","price":1098.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/79b2d980f32a05c5b3615d20d90f1e60L_c8a677b4-25a5-4ab6-bb03-bf62a6cac722.jpg?v=1778951176"},{"product_id":"ohlins-04-20-harley-davidson-sportster-xl-stx-36-blackline-shock-absorber","title":"2004-2022 Harley-Davidson Sportster Öhlins STX 36 Blackline 12in Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Sportster XL, 2004-2022. A premium suspension upgrade over the OEM rear shocks, with the all-black Blackline finish and proven STX 36 damping platform tuned for the Sportster chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the standard 12in (296mm) configuration — Öhlins's direct rebound + length-adjustable upgrade for the OEM Sportster rear shocks at stock-equivalent length. The S36D dividing-piston design integrates the reservoir into the shock body, with rebound damping and shock length adjustment for tuning ride height.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e12in (296mm) length — stock-equivalent for most XL Sportster applications\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36D)\u003c\/li\u003e\n\u003cli\u003eLength: 12in (296mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569538873,"sku":"OHLHD 751","price":933.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/0e64de9b18a33f694973414012612f4f.jpg?v=1778951177"},{"product_id":"ohlins-04-20-harley-davidson-sportster-xl-stx-36-blackline-shock-absorber-1","title":"2004-2022 Harley-Davidson Sportster Öhlins STX 36 Blackline 12in Piggyback Reservoir Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Sportster XL, 2004-2022. A premium suspension upgrade over the OEM rear shocks, with the all-black Blackline finish and proven STX 36 damping platform tuned for the Sportster chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the fully-adjustable premium configuration in the 12in Sportster Blackline series — the only build with both compression and rebound damping adjustment, plus a piggyback reservoir for consistent damping under sustained spirited riding. Recommended for riders who want the full Öhlins tuning range and the visual presence of the external reservoir.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003ePiggyback reservoir design for consistent damping under sustained load\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e12in (296mm) length — stock-equivalent for most XL Sportster applications\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline Piggyback shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. The piggyback reservoir extends outboard from the shock body — confirm clearance for aftermarket saddlebags, fender struts, or seat hardware before ordering.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36PR1C1L)\u003c\/li\u003e\n\u003cli\u003eLength: 12in (296mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569604409,"sku":"OHLHD 752","price":1648.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/139949e966560dab1695f93ccfaf50b0.jpg?v=1778951178"},{"product_id":"ohlins-04-20-harley-davidson-sportster-xl-stx-36-blackline-shock-absorber-3","title":"2004-2022 Harley-Davidson Sportster Öhlins STX 36 Blackline 13in Emulsion (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Sportster XL, 2004-2022. A premium suspension upgrade over the OEM rear shocks, with the all-black Blackline finish and proven STX 36 damping platform tuned for the Sportster chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the longer 13in (338mm) emulsion configuration — entry-tier in the STX 36 Blackline series and the most accessible price point in the Sportster lineup. The emulsion damper is preload-adjustable only (no damping or length adjustment), and the longer length suits riders wanting a slightly taller rear stance.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eEmulsion damper design (single-tube, no separate reservoir)\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e13in (338mm) length — longer than stock for a taller rear stance\u003c\/li\u003e\n\u003cli\u003ePreset spring rate for the application — no damping or length adjustment\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline Emulsion shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. The 13in length is taller than stock and will raise the rear of the bike slightly — confirm this is the intended use case before ordering.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003cli\u003eThis is the entry configuration in the Sportster STX 36 series. Riders carrying heavier loads or wanting damping adjustment should consider the dividing-piston (HD 751) or fully-adjustable piggyback (HD 752\/756) variants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36E)\u003c\/li\u003e\n\u003cli\u003eLength: 13in (338mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569735481,"sku":"OHLHD 754","price":768.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/17517683bedaf61236b584f8c6772ddf.jpg?v=1778951180"},{"product_id":"ohlins-04-20-harley-davidson-sportster-xl-stx-36-blackline-shock-absorber-4","title":"2004-2022 Harley-Davidson Sportster Öhlins STX 36 Blackline 13in Piggyback Reservoir Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Sportster XL, 2004-2022. A premium suspension upgrade over the OEM rear shocks, with the all-black Blackline finish and proven STX 36 damping platform tuned for the Sportster chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the fully-adjustable premium configuration in the 13in Sportster Blackline series — both compression and rebound damping adjustment, piggyback reservoir, and the longer 13in length for riders wanting a taller rear stance with the full Öhlins tuning range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003ePiggyback reservoir design for consistent damping under sustained load\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e13in (336mm) length — longer than stock for a taller rear stance\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline Piggyback shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. The piggyback reservoir extends outboard from the shock body and the 13in length raises the rear stance — confirm clearance and intended ride height before ordering.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36PR1C1L)\u003c\/li\u003e\n\u003cli\u003eLength: 13in (336mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569801017,"sku":"OHLHD 756","price":1648.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/0a720bef4330a3ba2d7da5e412183206.jpg?v=1778951180"},{"product_id":"ohlins-04-20-harley-davidson-sportster-xl-stx-36-blackline-shock-absorber-5","title":"2004-2022 Harley-Davidson Sportster Öhlins STX 36 Blackline 11in Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Sportster XL, 2004-2022. A premium suspension upgrade over the OEM rear shocks, with the all-black Blackline finish and proven STX 36 damping platform tuned for the Sportster chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the 11in (279mm) shorter-length configuration of the Sportster Blackline series — selected by riders wanting a lower seat height or a custom stance. The S36D dividing-piston design integrates the reservoir into the shock body for a clean profile, with rebound damping and shock length adjustment.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e11in (279mm) length — shorter than the OEM Sportster shock, intended for lowered or custom-stance setups\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. Note that the 11in length is shorter than stock and will lower the rear of the bike — confirm this is the intended use case before ordering.\u003c\/li\u003e\n\u003cli\u003eRiders wanting to retain stock ride height should consider the 12in (HD 751) or 13in (HD 754) variants instead.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36D)\u003c\/li\u003e\n\u003cli\u003eLength: 11in (279mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569866553,"sku":"OHLHD 757","price":933.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/028ec5bd5509e6cf45bf95f7036a2b51.jpg?v=1778951181"},{"product_id":"ohlins-91-17-harley-davidson-dyna-fxd-stx-36-blackline-shock-absorber","title":"1991-2017 Harley-Davidson Dyna Öhlins STX 36 Blackline 12in Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Dyna, 1991-2017. A premium suspension upgrade over the OEM rear shocks for the full Dyna FXD platform run, with the all-black Blackline finish and the proven STX 36 damping platform tuned for the Dyna chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the base configuration in the Dyna Blackline series — Öhlins's direct upgrade for the OEM Dyna rear shocks at 12in length. The S36D dividing-piston design integrates the reservoir into the shock body for a clean profile, with pin-tool preload adjustment and a fixed spring rate set for the application.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile)\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e12in length — stock-equivalent for most FXD applications\u003c\/li\u003e\n\u003cli\u003ePreset spring rate for the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36D)\u003c\/li\u003e\n\u003cli\u003eLength: 12in (305mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569932089,"sku":"OHLHD 761","price":933.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/30e938caedbfccf17ec92e41b71bccde.jpg?v=1778951182"},{"product_id":"ohlins-91-17-harley-davidson-dyna-fxd-stx-36-blackline-shock-absorber-1","title":"1991-2017 Harley-Davidson Dyna Öhlins STX 36 Blackline 12in Adjustable Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Dyna, 1991-2017. A premium suspension upgrade over the OEM rear shocks for the full Dyna FXD platform run, with the all-black Blackline finish and the proven STX 36 damping platform tuned for the Dyna chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the mid-tier configuration in the 12in Dyna Blackline series — adds rebound damping adjustment and shock length adjustment to the base HD 761 platform. Recommended for riders who want tuning authority over rear damping without going to the full piggyback-reservoir setup.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e12in length — stock-equivalent for most FXD applications\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36DR1L)\u003c\/li\u003e\n\u003cli\u003eLength: 12in (305mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300569997625,"sku":"OHLHD 762","price":1153.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/289864b1b9fe2b44e4fd666043ad0d0e.jpg?v=1778951183"},{"product_id":"ohlins-91-17-harley-davidson-dyna-fxd-stx-36-blackline-shock-absorber-2","title":"1991-2017 Harley-Davidson Dyna Öhlins STX 36 Blackline 12in Piggyback Reservoir Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Dyna, 1991-2017. A premium suspension upgrade over the OEM rear shocks for the full Dyna FXD platform run, with the all-black Blackline finish and the proven STX 36 damping platform tuned for the Dyna chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the fully-adjustable premium configuration in the 12in Dyna Blackline series — adds compression damping adjustment and a piggyback external reservoir for consistent damping under sustained spirited riding. Recommended for riders who want the full Öhlins tuning range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003ePiggyback reservoir design for consistent damping under sustained load\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e12in length — stock-equivalent for most FXD applications\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline Piggyback shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36PR1C1L)\u003c\/li\u003e\n\u003cli\u003eLength: 12in (305mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300570063161,"sku":"OHLHD 763","price":1648.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/14679d7da49367e171e749b7f9747d69.jpg?v=1778951183"},{"product_id":"ohlins-91-17-harley-davidson-dyna-fxd-stx-36-blackline-shock-absorber-4","title":"1991-2017 Harley-Davidson Dyna Öhlins STX 36 Blackline 13in Adjustable Shock (Pair)","description":"\u003cp\u003eÖhlins STX 36 Blackline rear shocks for Harley-Davidson Dyna, 1991-2017. A premium suspension upgrade over the OEM rear shocks for the full Dyna FXD platform run, with the all-black Blackline finish and the proven STX 36 damping platform tuned for the Dyna chassis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the 13in mid-tier configuration in the Dyna Blackline series — the longer length raises the rear stance slightly, with rebound damping and shock length adjustment. Recommended for riders wanting a taller rear ride height or improved cornering clearance, with damping tuning authority.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eDividing-piston design with reservoir integrated into the shock body (slim profile)\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003e13in length — taller than stock for a raised rear stance and improved cornering clearance\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the application\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX 36 Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs for the application\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or additional components required.\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX 36 Blackline (S36DR1L)\u003c\/li\u003e\n\u003cli\u003eLength: 13in (336mm)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300570194233,"sku":"OHLHD 765","price":1153.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/289864b1b9fe2b44e4fd666043ad0d0e_cbb6d53a-abf7-4893-8f21-d021a371cbf9.jpg?v=1778951185"},{"product_id":"ohlins-14-25-harley-fl-touring-stx-36-twin-blackline-12in-shocks","title":"2014-2024 Harley-Davidson Touring Öhlins STX Pro Blackline 12in Shocks 150-500 lb (Pair)","description":"\u003cp\u003eÖhlins STX Pro Blackline rear shocks for Harley-Davidson Touring, 2014-2024. Öhlins' current-generation Touring rear suspension, replacing the long-running HD 044 with refined hardware, simpler installation, and the same fully-adjustable damping that's defined the series.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe STX Pro Blackline retains the proven STX 36 platform with the hose-mounted external reservoir for consistent damping under sustained load — now with metal compression adjuster knobs, half-inch ID bushings (no sleeves required), and Öhlins-branded anodized aluminum reservoir bracket arms. Spring rate is preset for a 150-500 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eExternal hose-mounted reservoir with metal compression adjuster knob\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eHalf-inch ID bushings for direct fitment — no sleeves required\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms (included)\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 150-500 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX Pro Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 150-500 lb weight range\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or sleeves required (half-inch ID bushings).\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003cli\u003eReservoir brackets mount to the saddlebag support hardware — confirm clearance for aftermarket bags or trunk setups before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX Pro Blackline (replaces HD 044)\u003c\/li\u003e\n\u003cli\u003eLength: 12in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, external hose reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, compression, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 150-500 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300570259769,"sku":"OHLHD 778","price":1758.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/4f2b2ed2e43bb45f48b8729ec8556d34.jpg?v=1778951186"},{"product_id":"ohlins-14-25-harley-fl-touring-stx-36-twin-blackline-12in-stiffer-spring-shocks","title":"2014-2024 Harley-Davidson Touring Öhlins STX Pro Blackline 12in Shocks 250-575 lb (Pair)","description":"\u003cp\u003eÖhlins STX Pro Blackline rear shocks for Harley-Davidson Touring, 2014-2024. Öhlins' current-generation Touring rear suspension, replacing the long-running HD 044 with refined hardware, simpler installation, and the same fully-adjustable damping that's defined the series.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe STX Pro Blackline retains the proven STX 36 platform with the hose-mounted external reservoir for consistent damping under sustained load — now with metal compression adjuster knobs, half-inch ID bushings (no sleeves required), and Öhlins-branded anodized aluminum reservoir bracket arms. Spring rate is preset for a 250-575 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eExternal hose-mounted reservoir with metal compression adjuster knob\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eHalf-inch ID bushings for direct fitment — no sleeves required\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms (included)\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 250-575 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX Pro Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 250-575 lb weight range\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or sleeves required (half-inch ID bushings).\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003cli\u003eReservoir brackets mount to the saddlebag support hardware — confirm clearance for aftermarket bags or trunk setups before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX Pro Blackline (replaces HD 044)\u003c\/li\u003e\n\u003cli\u003eLength: 12in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, external hose reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, compression, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 250-575 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300570325305,"sku":"OHLHD 778S2","price":1758.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/4f2b2ed2e43bb45f48b8729ec8556d34_0a5a07d0-3c34-4c1f-bcf8-8f4389870519.jpg?v=1778951186"},{"product_id":"ohlins-14-26-harley-fl-touring-stx-36-twin-blackline-13in-shocks-150lb-max-500lb","title":"2014-2024 Harley-Davidson Touring Öhlins STX Pro Blackline 13in Shocks 150-500 lb (Pair)","description":"\u003cp\u003eÖhlins STX Pro Blackline rear shocks for Harley-Davidson Touring, 2014-2024. Öhlins' current-generation Touring rear suspension, replacing the long-running HD 044 with refined hardware, simpler installation, and the same fully-adjustable damping that's defined the series.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe STX Pro Blackline retains the proven STX 36 platform with the hose-mounted external reservoir for consistent damping under sustained load — now with metal compression adjuster knobs, half-inch ID bushings (no sleeves required), and Öhlins-branded anodized aluminum reservoir bracket arms. Spring rate is preset for a 150-500 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eExternal hose-mounted reservoir with metal compression adjuster knob\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eHalf-inch ID bushings for direct fitment — no sleeves required\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms (included)\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 150-500 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX Pro Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 150-500 lb weight range\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or sleeves required (half-inch ID bushings).\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003cli\u003eReservoir brackets mount to the saddlebag support hardware — confirm clearance for aftermarket bags or trunk setups before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX Pro Blackline (replaces HD 044)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, external hose reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, compression, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 150-500 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300570390841,"sku":"OHLHD 779","price":1758.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/4f2b2ed2e43bb45f48b8729ec8556d34_d00167a4-b74a-4426-bfc9-cf8714ac2761.jpg?v=1778951187"},{"product_id":"ohlins-14-26-harley-fl-touring-stx-36-twin-blackline-13in-shocks-min-250lb-max-575lb","title":"2014-2024 Harley-Davidson Touring Öhlins STX Pro Blackline 13in Shocks 250-575 lb (Pair)","description":"\u003cp\u003eÖhlins STX Pro Blackline rear shocks for Harley-Davidson Touring, 2014-2024. Öhlins' current-generation Touring rear suspension, replacing the long-running HD 044 with refined hardware, simpler installation, and the same fully-adjustable damping that's defined the series.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a complete pair (left and right rear shocks).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe STX Pro Blackline retains the proven STX 36 platform with the hose-mounted external reservoir for consistent damping under sustained load — now with metal compression adjuster knobs, half-inch ID bushings (no sleeves required), and Öhlins-branded anodized aluminum reservoir bracket arms. Spring rate is preset for a 250-575 lb combined rider + passenger + cargo weight range.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure nitrogen-charged monotube design with 36mm piston\u003c\/li\u003e\n\u003cli\u003eExternal hose-mounted reservoir with metal compression adjuster knob\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping, compression damping, and shock length\u003c\/li\u003e\n\u003cli\u003ePin-tool spring preload adjustment\u003c\/li\u003e\n\u003cli\u003eHalf-inch ID bushings for direct fitment — no sleeves required\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms (included)\u003c\/li\u003e\n\u003cli\u003eFixed spring rate for a 250-575 lb combined loaded weight range\u003c\/li\u003e\n\u003cli\u003eHard-anodized, CNC-machined components for corrosion resistance and consistent damping\u003c\/li\u003e\n\u003cli\u003eFully serviceable and rebuildable — Öhlins services these in-house, and they are designed to be rebuilt rather than replaced over their service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Öhlins STX Pro Blackline shock absorbers\u003c\/li\u003e\n\u003cli\u003ePre-installed springs matched to the 250-575 lb weight range\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum reservoir bracket arms\u003c\/li\u003e\n\u003cli\u003ePreload adjustment pin tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on replacement for the OEM rear shocks. No frame modifications or sleeves required (half-inch ID bushings).\u003c\/li\u003e\n\u003cli\u003eInitial sag setting is recommended after install.\u003c\/li\u003e\n\u003cli\u003eReservoir brackets mount to the saddlebag support hardware — confirm clearance for aftermarket bags or trunk setups before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Öhlins STX Pro Blackline (replaces HD 044)\u003c\/li\u003e\n\u003cli\u003eLength: 13in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eDamper type: Monotube, high-pressure nitrogen-charged, external hose reservoir\u003c\/li\u003e\n\u003cli\u003eAdjustment: rebound, compression, length, preload\u003c\/li\u003e\n\u003cli\u003eLoaded weight range: 250-575 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":53300570456377,"sku":"OHLHD 779S2","price":1758.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/files\/0c137b866ef6ea3f05a4b8596ac2d17e.png?v=1778951188"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/1557\/3561\/collections\/776.png?v=1778961695","url":"https:\/\/tires-fast.com\/collections\/motorcycle-suspension.oembed","provider":"Tires Fast","version":"1.0","type":"link"}